Forum Comments

Where is the WPS Pin located on my HP Deskjet 3755
In General Discussions
Peter Groft
Jun 15, 2022
Types of WPS Connections for HP Printer On all the HP Printer you will find either of the below WPS options to connect the printer wirelessly. WPS Push Button (For non-screen Printers) WPS Pin ( For Screen enabled Printers) Connect HP printer using WPS Push Button Go to the control panel of your HP Printer and then after this after pressing the Wireless or Settings Button, you will observe a Blue Light starts blinking. Go to the option of “WiFi Protected Setup” and then follow the instructions which appear on the printer screen. After this, you will have to select the option “WPS Button”. When you do so, the printer will tell you to press the WPS button the wireless router. After pressing the WPS button on the router, move to the printer and for a wireless connection, hit continue. Now Connection will be established and the printer is ready to use. If you are using an HP printer with a screen and you have a WPS Push button then follow the below steps. Make sure printer is ON before moving to the next step. Go to the HP printer control panel or screen and Press the Wireless Button. Now the Wireless BLUE light will start blinking. On the printer screen, you will find the option “WiFi Protected Setup“. Go to “WiFi Protected Setup” and select “Push Button”. Go to your wireless Router. At the backside of your router, you will find a WPS Button. Press and Hold that WPS button for 3-4 sec. WPS light will start blinking on the router itself. Wait for 2-3 mins Both the lights on printer and Router stop blinking. Take a look at the printer screen “Connection Established“. Now Printer is connected with the wireless network with WPS Button Connect HP Printer Using WPS Pin Go to the control panel of your HP Printer and then after pressing the Wireless button, go to the Settings. After touching on the WiFi Protected Setup, you should follow the prompts appearing on the screen. Now you will be prompted to PIN, tap on this PIN. When you do so, WPS PIN will be displayed on the screen. Next step is to access the configuration utility or the software for the wireless access point or wireless router. After this, you will have to enter WPS PIN. After the completion of setup, in All Programs, open the HP Folder of Printer. Then, go to the Printer Setup and Software. Then, choose the option of “Connect a New Printer”. This way, you can easily install the Network Printer Driver. Congratulation WPS Pin has been generated and your HP Printer is connected wirelessly with you windows 10 computer. Hope This Helps, Peter
0
0
How to connect hp Deskjet printer to wifi on Windows 10
In General Discussions
Peter Groft
Jun 15, 2022
A. Prepare for the connection Make sure the wireless connection is working fine and the other wireless devices like a phone or laptop can connect and access the internet. Identify your Network name and Network password. This information will be used to find and connect to your network on the wireless printer. Make sure the router and computer are turned on, and that the computer is connected to the same wireless network to which the printer will be connected. Turn on the printer and place it close to the computer and within range of the router during the setup procedure. B. Connect printer to the wireless network The process for this will vary depending on the printer. The Wi-Fi network name (SSID) and password information will be required. - Many printers allow connecting to the wireless network using the built-in menu system. The following image shows a sample interface. Other printers will have a different interface. - If the printer and router both support WPS push-to-connect, simply push the WPS button on the printer, then press the WPS button on the router within two minutes. The connection will be made automatically. - Some older wireless printers may require connecting to a computer first to set up the wireless connection. This is common if the printer does not have a built-in menu, but does support wireless. Read the printers user guide if you have trouble connecting. If the manual cannot be found, try downloading a PDF copy from the manufacturer's Support site. This May Work, Peter
0
0
 

Peter Groft

More actions